menu search
lang
email
1

News

  • The Important Role of Hubei Silane Coupling Agents in Galvanizing

    Galvanizing is currently one of the most important methods for surface protection of steel at home and abroad. Galvanized steel sheets are widely used in automobile manufacturing, home appliances, con...

  • The Use of Silane Coupling Agents in Quartz Powder

    Active quartz powder can have the crosslinking reactions with the resin and the curing agent. But it will not promote or retard the curing reaction of the resin and the curing agent system, nor will i...

  • The Introduction of Epoxy Silanes

    Epoxy silanes are colorless and transparent liquids, which are easily soluble in a variety of organic solvents, easily hydrolyzed, condensed to form polysiloxane, and is easily polymerized in the pres...

Introduce the Properties and Applications of Vinyl Tri (2-methoxy ethoxy) Silane (KH-172 vinyl silane)

2020/09/07


1.KH-172 vinyl silane modifies polyethylene and other polymers by grafting onto the main chain of the polymer. The side chain of the polymer has a trimethylsilyl group as the active point of warm water crosslinking.

2. The advantages of polymer crosslinking are as follows: 1) better maximum service temperature 2) lower internal creep decomposition of polymer 3) better chemical resistance 4) excellent pressure cracking 5) better wear resistance 6) higher impact strength 7) memory properties (shrinkage film and pipe).

3. The advantages of silane cross-linking over irradiation cross-linking or peroxide cross-linking are as follows: 1) low equipment investment, 2) low production cost, 3) high productivity, 4) process diversity, 5) wide process tolerance (control of premature cross-linking) for filling composites 8 ) Suitable for all densities of polyethylene and copolymers

Application:
In the extruder, KH-172 vinyl silane can be grafted onto the main chain of polyethylene through the action of peroxide initiator. The grafted polyethylene can be made into molded products such as cable sheaths and insulation, pipes or other extruded and molded products, which is the second step of the extrusion process. The product was finally crosslinked by warm water.