More Than Silicones

Your Reliable Partner for Silane Coupling Agents, Specialty Silanes, Siloxanes and Custom Products.

You are in our Global Site

Email Us

Ⅰ. Storage of silane coupling agents


1. When storing silane coupling agent, pay special attention to avoid denaturation reaction with water or moisture.


2. Once the container is opened, replace the stopper as soon as possible to prevent the infiltration of moisture.


3. The storage room must be cool, high temperature and high humidity are absolutely not allowed to store silane coupling agents.


Ⅱ. Treatment of silane coupling agents


The silane coupling agent will be hydrolyzed when it comes in contact with water. When handling and using the silane coupling agent, sufficient care needs to be taken, because usually the moisture of the silane coupling agent will be accompanied by hydrogen chloride, methanol, ethanol, ethylene glycol and other hydrolysis. product formation.


1. The silane coupling agent must be kept away from fire and moisture as far as possible, and should not be placed in an open condition.


2. The studio where the silane coupling agent is handled should be well ventilated to avoid inhaling steam.


3. When using the silane coupling agent, protective gloves and glasses should be used to protect the skin and eyes. If there is contact, immediately rinse with tap water and then seek medical attention.


4. It is recommended that workers wash their hands thoroughly after handling the silane coupling agent, especially before eating, drinking or smoking.


5. The silane coupling agent needs to be washed with a large amount of water, or absorbed with a rag or sand and burned.


6. The odor of chlorosilane is particularly unpleasant, and even at very low concentrations, this odor is an early warning signal. Chlorosilane is flammable, and when the chlorosilane coupling agent decomposes, it will generate corrosive hydrogen chloride gas and come into contact with moisture in the atmosphere. Also, it is a strong irritant to the skin, so extensive care is essential when handling.


Co-Formula's commercial products include isocyanate silanes, amino silanes, epoxy silanes, mercapto silanes, phenyl silanes, vinyl silanes, chlorosilanes, alkyl silanes, long chain silanes, silane crosslinkers, dimethyl silicone oil, methyl silane Hydrogen based silicone oil and bi-end type siloxane. In addition to these general-purpose products, Co-Formula can also provide coatings and plastic additives, silicone polymers, and custom solutions for customers worldwide.


Co-Formula products are commonly used as coupling agents, crosslinkers, adhesion promoters, surface modifiers, primers, dispersants, finishes and water scavengers.


Co-Formula always works with customers to develop what they want and strive to meet their needs. If necessary, welcome to consult.